ANALISA TEKNIS DAN EKONOMIS PEMILIHAN JENIS DAN MATERIAL ELBOW PADA LINE NUMBER 6SLC-17705-ASA2-H DAN 6SMLC-12230-BSA DI SISTEM PERPIPAAN STEAM CONDENSATE

Kusuma, Risdianto Chandra (2015) ANALISA TEKNIS DAN EKONOMIS PEMILIHAN JENIS DAN MATERIAL ELBOW PADA LINE NUMBER 6SLC-17705-ASA2-H DAN 6SMLC-12230-BSA DI SISTEM PERPIPAAN STEAM CONDENSATE. Diploma thesis, POLITEKNIK PERKAPALAN NEGERI SURABAYA.

Full text not available from this repository.

Abstract

ABSTRAK Plant yang terdapat di PT.PUPUK SRIWIDJAJA beroperasi selama 24 jam, maka plant ini sangat membutuhkan material yang cocok untuk meminimalkan terjadinya shutdown. Plant ini beroperasi pada themperature 200˚C, pressure 1.2 Mpa, dan dilalui fluida yaitu steam condensate. Plant ini mempunyai sifat erosi yang cukup tinggi karena terdapat pressure yang besar, themperature yang tinggi dan belokan atau elbow pada plant ini mempunyai sudut 90˚. Elbow 90˚ sangat rawan sekali terhadap erosi pada material. Tugas Akhir ini membahas perhitungan mengenai erosion rate pada material Carbon Steel A234 Gr WPB, Alloy Steel A333 Gr 9 dan Stainless Steel 403 Gr 304 dengan variabel schedule 40 dan 80 dan sudut material 45˚ dan 90˚. Dari erosion rate dapat di cari umur material, Analisa ini menggunakan rumus yang ada di buku DNV dan API 570. Setelah dilakukan analisa dinyatakan bahwa material Stainless Steel pada schedule 80 dan sudut 45˚ dengan umur 58 tahun paling baik hasilnya dan tahan terhadap erosi dan material Carbon Steel pada schedule 40 dan sudut 90˚ dengan umur 9 tahun. Dengan itu dapat disimpulkan material carbon steel paling rendah kualitasnya dan sangat lemah ketahanan materialnya. Kata Kunci : Erosi, Tekanan Fluida, Elbow sudut 45˚ dan 90˚, ASME B31.3, Umur material. ABSTRACT Plant located in PT.PUPUK Sriwidjaja which operates 24 hours, then the project is in dire need of a suitable material to minimize the occurrence of shutdown at the plant. On this project operates on themperature 200C, pressure 1.2 MPa, and the fluid is passed through the steam condensate. This plant has a fairly high erosion properties because there is a big pressure, high themperature and bend or elbow at this plant has a 90˚ angle. Elbow 90˚ very very prone to erosion in the material .. This final project discusses the calculation of the erosion rate in the material of Carbon Steel A234 Gr WPB, Alloy Steel A333 Gr 9 and Stainless Steel 403 Gr 304 with a variable schedule 40 and 80 and the angle of 45˚ and 90˚ material. Of the erosion rate can be in search of age material, this analysis using the formula in the book DNV and API 570. After analysis it can be stated that the material Stainless Steel on schedule 80 and 45˚ angle to the age of 58 years of the most excellent results and is resistant to erosion and material Carbon Steel on schedule 40 and angle of 90˚ to the age of 9 years. With it we can conclude the most low carbon steel material quality and very weak resistance material. Kata Kunci : Erosion, Pressure Fluid, Elbow angle 45˚ and 90˚, ASME B31.3, Lifetime material.

Item Type: Thesis (Diploma)
Subjects: T Technology > T Technology (General)
Divisions: Jurusan Teknik Permesinan Kapal > D4 Teknik Perpipaan
Depositing User: Unnamed user with email repository@ppns.ac.id
Date Deposited: 10 Sep 2018 04:21
Last Modified: 10 Sep 2018 04:21
URI: http://repository.ppns.ac.id/id/eprint/486

Actions (login required)

View Item View Item