PENERAPAN PID KONTROL BERBASIS LABVIEW PADA APLIKASI PENSTABIL TEKANAN PADA SERVICE WATER TANK DI PLTU PAITON 3

Juksia, Agis (2017) PENERAPAN PID KONTROL BERBASIS LABVIEW PADA APLIKASI PENSTABIL TEKANAN PADA SERVICE WATER TANK DI PLTU PAITON 3. Diploma thesis, POLITEKNIK PERKAPALAN NEGERI SURABAYA.

Full text not available from this repository.

Abstract

ABSTRAK Permasalahan yang sering terjadi pada service water tank sebagai proses penyaluran air menuju make up water tank (demin) adalah kurang stabilnya tekanan air. Dalam beberapa kondisi, setiap permasalahan harus dapat diselesaikan dengan cepat. Karena demin ini merupakan air yang di gunakan untuk steam , dimana steam ini digunakan untuk menghasilkan megawatt demand. Setiap terjadi low pressure pada pembacaan DCS ,akan mengaktifkan alarm low pada sistem. Namun dalam penerapan yang sekarang ini pada PLTU Paiton 3 masih menggunakan sistem relief valve untuk menyetabilkan pressure. Dimana sistem relief valve ini masih belum sempurna untuk menyetabilkan pressure pada saat jam kerja yakni jam 07.00 am – 04.00 pm. Untuk menanggulangi hal tersebut diperlukan sistem penstabil tekanan. Dimana sistem ini mengatur bukaan control valve untuk menjaga tekanan tetap stabil.Control valve akan dimodelkan dengan metode PID . Pembacaan data ini akan dibaca oleh Arduino Uno dan ditampilkan serta dibaca secara real time pada LabVIEW. Pada tugas akhir ini, alat dibuat dalanm skala lab da di rancang sedemikia rupa agar alat mirip dengan plant di industri. Penelitian ini dilakukan selama 4 bulan. Alat ini menggunakan sensor HK1100C yang mana sensor ini merupakan sensor tekanan air. Sensor ini memiliki toleransi eror sekitar 1%. Aktuator yang digerakkan merupakan control valve. Pada tugas akhir ini control vave di rancang dengan motor servo yang di couple dengan manual valve. Keberhasilan alat ini mencapai 85%. Pada alat ini , tekanan yang stabil hannya pada saat kondisi manual valve on semua dengan set point 30 kPa. Kata kunci :LabVIEW, PID, Arduino Uno ABSTRACT Problems often occur on the service water tank as the process of channeling of water towards the make up water tanks (demin) is unstable pressure water. On some condition , every trouble must be having fast solution. Because demin is using for making steam. In PLTU Paiton 3 rd Unit , steam used to produce energy . Every having low pressure , DCS reader making alarm. But an aplication in PLTU Paiton 3rd Unit, still using relieve valve on service water tank system. Realise , that is system unperfect. That system can’t stable the pressure in service water tank. Specially on time working about 07.00am and 04.00pm To resorve the problem , need minimum pressure stabilisation system. That system can setting the width the valve opening for stable pressure on service water tank. Control valve will be modification by PID control. Data will be reading by Arduino Uno and showing by LabVIEW software real time.Researchers need 4 mount for this research. This research is build protoptye only, so researcher chang control valve with Motor Servo couple with valve. 4 mount the author do observasion. This plant using HK1100C for detected pressure water. This sensor having error toleransi about 1%. The aktuator in this plant is control valve. The control valve is modified of servo motor and manual valve. This plant working stabil about 85%. Even 3 manual valve was openned and control valve was closed. The sensor read the pressure was 29 until 30 kPa. But i the other condition , contol valve workig unstabil so the presure not stabil too. Keyword:LabVIEW, PID, Arduino Uno

Item Type: Thesis (Diploma)
Subjects: T Technology > T Technology (General)
Divisions: Jurusan Teknik Kelistrikan Kapal > D4 Teknik Otomasi
Depositing User: Unnamed user with email repository@ppns.ac.id
Date Deposited: 22 Sep 2018 04:20
Last Modified: 22 Sep 2018 04:20
URI: http://repository.ppns.ac.id/id/eprint/1199

Actions (login required)

View Item View Item