ANALISIS KEKUATAN STRUKTUR DAN ESTIMASI FATIGUE LIFE PADA KONSTRUKSI OVERHEAD CRANE TIPE DOUBLE GIRDER BERKAPASITAS SWL 10 TON

Prayoga, Raka (2016) ANALISIS KEKUATAN STRUKTUR DAN ESTIMASI FATIGUE LIFE PADA KONSTRUKSI OVERHEAD CRANE TIPE DOUBLE GIRDER BERKAPASITAS SWL 10 TON. Diploma thesis, POLITEKNIK PERKAPALAN NEGERI SURABAYA.

Full text not available from this repository.

Abstract

ABSTRAK Overhead crane merupakan salah satu pesawat angkat yang umum digunakan dalam dunia perindustrian untuk membantu proses pengangkatan dan pemindahan barang. Dalam aplikasinya overhead crane digunakan untuk mengangkat beban yang bervariasi dan berulang (siklis) sehingga rawan akan terjadinya kelelahan struktur (fatigue). PT. BBI banyak menggunakan crane dengan jenis ini, namun tidak pernah dilakukan analisis untuk mengetahui estimasi usia struktur tersebut sehingga rawan terjadinya crack hingga patah. FEM (Finite Element Method) merupakan metode yang umum digunakan dalam analisis struktural karena mampu membagi struktur menjadi nodal-nodal yang mewakili load pada masing-masing nodal tersebut. Analisis akan dilakukan pada bagian utama overhead crane yaitu girder dan end carriage. Kesimpulan akhir menunjukkan bahwa konstruksi overhead crane mengalami tegangan vonMises yang masih berada di bawah batas aman akibat beban kerja maksimal (allowable stress),dengan begitu dinyatakan aman dengan nilai stress ratio sebesar 0,56. Nilai defleksi juga mengindikasikan tidak ada batas maksimal yang terlampaui. Dari perhitungan fatigue berdasarkan hukum Palmgren Miner yang ditinjau dari 5 titik kritis konstruksi, diperoleh nilai estimasi usia lelah overhead crane berkisar 142 tahun. Kata kunci : fatigue, overhead crane, FEM (Finite Element Method) ABSTRACT Overhead cranes is lifting equipment that is commonly used in industry to assist in the lifting and moving of goods. In its application, the overhead crane is used to lift weights in varying and recurring (cyclical) weight so it is prone to structural fatigue (fatigue). PT. BBI use this type of crane much, but never done the analysis to determine the estimated age of the structure which is so prone to crack up and broken FEM (Finite Element Method) is a common method used in structural analysis because it can divide it into nodal - nodal representing the structure load on each of these nodal. The analysis will be performed on the main part of the overhead crane girder and end carriage joint. The final conclusion shows that the construction of an overhead crane experiences vonMises stress which is still below safe limits as a result of the maximum working load ( allowable stress ) , thus declared safe by the value of the stress ratio of 0.56 . Deflection value also indicates there is no maximum limit is exceeded. From calculations based on the law Palmgren Miner fatigue were evaluated from 5 critical point construction, the value of the estimated age ranges of overhead crane is about 142 years Keyword : fatigue, overhead crane, FEM (Finite Element Method)

Item Type: Thesis (Diploma)
Subjects: T Technology > T Technology (General)
Divisions: ?? tddm ??
Depositing User: Unnamed user with email repository@ppns.ac.id
Date Deposited: 12 Sep 2018 06:47
Last Modified: 12 Sep 2018 06:47
URI: http://repository.ppns.ac.id/id/eprint/571

Actions (login required)

View Item View Item