PEMERIKSAAN HASIL SANDBLASTING PADA STANDARD Sa.2 1 / 2 DI PROJECT FABRICATION 8 UNITS INLET AND EXHAUST SYSTEM PT SWADAYA GRAHA - GRESIK

Putera Al Khakim, Syaifullah (2015) PEMERIKSAAN HASIL SANDBLASTING PADA STANDARD Sa.2 1 / 2 DI PROJECT FABRICATION 8 UNITS INLET AND EXHAUST SYSTEM PT SWADAYA GRAHA - GRESIK. Diploma thesis, POLITEKNIK PERKAPALAN NEGERI SURABAYA.

Full text not available from this repository.

Abstract

ABSTRAK Pada tahap surface preparation painting terdapat proses cleaning. Proses cleaning adalah proses pembersihan material dari kotoran – kotoran maupun karat yang menempel pada permukaan material. Salah satu metode yang digunakan pada proses cleaning adalah sandblasting. Sandblasting lebih dikenal dengan proses pembersihan permukaan dengan cara menembakkan dengan bantuan tekanan angin dari kompresor bertekanan tinggi, supaya partikel pasir silika yang disemburkan permukaan material menjadi kuat tekanan semburnya sehingga menimbulkan benturan atau hantaman, membentuk profil kekasaran pada permukaan sehingga cat lebih melekat dan menempel lebih kuat. Pada proses pengerjaan sandblasting untuk semua unit 1-8 dilakukan dengan ketentuan dan cara yang sama. Dengan standard SSPC-SP10/Sa.2 1/ 2 sebagai acuan dalam pengerjaannya. Yang mana untuk setiap unitnya hampir 95% permukaan persegi bebas dari karat, kerak, cat, dan yang lain. Setelah itu akan dilakukan test kualifikasi atau inspeksi yang meliputi presentase kebersihan permukaan dan kekasaran permukaan (roughness). Dari hasil data presentase kebersihan permukaan dan kekasaran permukaan (roughness) yang telah diperoleh dapat diketahui bahwa dalam pengerjaan surface preparation painting (sandblasting) pada project fabrication 8 units inlet and exhaust system di PT Swadaya Graha – Gresik dikerjakan dengan sanagat baik. Dimana hasil dari inspeksi untuk semua unit 1-8 sudah sesuai dengan standard yang ditetapkan. Kata kunci : Sandblasting, Sa.2 1/ 2, Inspeksi, Kebersihan Permukaan, Kekasaran Permukaan ABSTRACT On stage there painting surface preparation cleaning process. Cleaning process is the process of cleaning material from the dirt or rust attached to the surface of the material. One method used in the cleaning process is sandblasting. Sandblasting is known as surface cleaning process by means of firing with the help of the wind pressure of the high pressure compressor, so that particles of silicasand is ejected material surface to be strong pressure blurted, causing collision or impact, forming on the surface roughness profile so that the paint is attached and stronger stick. In the process of sandblasting for all units 1-8 performed with the provision sand the same way. With standard SSPC - SP10/Sa.2 1 / 2 as a reference in the process. Which for nearly 95% each unit square surface is free from rust, scale, paint, and others. After that it will bed one qualification test or inspection that covers a percentage of the surface clean liness and roughness of the surface (roughness). From the results of data the percentage of surface clean liness and roughness of the surface (roughness) which have been obtained can be found in the works of painting surface preparation (sandblasting) on the project fabrication 8 units inlet and exhaust system in PT Swadaya Graha - Gresik darting done well. Where the results of inspections for all units 1-8 are in accordance with the standards set. Keyword : Sandblasting, Sa.2 1/ 2, Inspection, surface clean lines, roughness

Item Type: Thesis (Diploma)
Subjects: T Technology > T Technology (General)
Divisions: Jurusan Teknik Bangunan Kapal > D4 Teknik Perancangan dan Kontruksi Kapal
Depositing User: Unnamed user with email repository@ppns.ac.id
Date Deposited: 27 Aug 2018 04:33
Last Modified: 27 Aug 2018 04:33
URI: http://repository.ppns.ac.id/id/eprint/125

Actions (login required)

View Item View Item